Discovery Ajax Scientific Thermometer Temperature Outdoor Start From Our Site Specification & Features Product Name: Ajax Scientifi...
Discovery Ajax Scientific Thermometer Temperature Outdoor Start From Our Site
Specification & Features
- Product Name: Ajax Scientific Dual Scale Thermometer with Metal Back, -30 to -110 Degree C Temperature Range, For Indoor/Outdoor
- Brand: Ajax Scientific
- Model: TH013-0110
- Dual scale thermometer
- It measures from -30 to -110 degrees celsius
Comments List
Ajax Scientific Thermometer Temperature Outdoor Reviews:
This filament is flexible, but we can't shoot (so no "rubber" once it is printed!) My first attempt was to print a half-sphere with a raft, and 5% fill, at 225 degrees and fairly quickly. I also put glue (Pritt) on the platform. Unlike a "print" with Arnitel, the result was super fragile. By pressing it I've broken the pattern (the son didn't go enough because they are not really flexible. The "bonding" seems to be less easily and it is necessary to print very slowly (30mm/s as they say). Second attempt: More filling, layers that are more dense, to 230 and more slowly. The result looks more like a print with PLA, but with a little flexibility. In any case, nothing to do with "rubber"!! As the yarn is very soft, it is necessary to have a hotend that remains cold at the top (ventilation!). It say on their site. In any case, it seems to me that this plastic is relatively easy to use, provided they use a filling more dense and simple, print slowly, and to strengthen the walls. And absolutely use glue and/or a "raft", otherwise it takes off.Cheap Ajax Scientific Thermometer Temperature Outdoor:
The "soil" of my half-sphere missed 3 layers was very strong. In other words, it could be plastic ideal for print of packaging for mobile devices, bracelets, etc. (not tested yet). A kind of PLA a little more flexible? In case of doubt: Do not buy. The point that annoys me: it's Hard to find documentation strong on this filament.. The storage box of the different component is broken. It is too late to make a return for exchange as a Christmas gift. Box broken + LCD Display does not work + 1 RGB LED instead of 5 + 6 red LED instead of 10. Kit card-based UNO R3 from Sainsmart pretty well supplied for introduction to electronics and programming micro-controllers ARDUINO. The kit comes in a plastic box, two-stage, to complete the description of the product of LED in red, green and blue (4 of each) are provided as well as the resistance of 1 kilo-ohms and 10 kilo-ohms. No doc provided but the link gives access to a pdf (in English) describing the 16 arrangements proposed and the source codes of the programs. Ca caters well to the novice, it is well explained and easy to access but you will need to know the basics of programming all the same. To use the kit you must install the ARDUINO development environment to upload to the site ARDUINO, excellent site with apparently a wealth of information to go further (if the link to the pdf does not work at the time of purchase of the kit, not serious, because the website ARDUINO contains all the information and examples to begin with).Cheap Ajax Scientific Dual:
Happy with my purchase, I recommend! This kit contains a set of components and sensors ideal for hands-on on various projects on Arduino.. Yes, like all the other people who have bought this product, one can regret the absence of a tutorial in French. A shame, because it is hard for a total newbie to navigate in the components. why this difference of prixentre the blue and yellow rougede 450 euros + 800???? I ordered a spool of PLA filament for 3D printer. I received a spool of wire ABSje have not found a procedure to exchange the product but only the possibility of return and refund. if I recommend this product be it good or bad????? First a small fix: if this is really MY first printer, I have already seen turn in to a job, a Zortrax. Therefore, I have insight into the defects (of the Zortrax) : shelf-type printed circuit board so easily abîmable when we take off the object, heat is non-regular if we add no edges, software. Let's have a look at the Flashforge Dreamer - cheap!! - aesthetic and not bulky - printer closed so no problem to heat unevenly - tray covered by a kind of carpet sticker (comes with several mats) so no risk of damage to software easy - two possible colors. Beware, however: when one prints in two colors at the same level (vertical), frequent change of color tends to leave slight deposits of the other color. - color screen and touch - no need to connect the PC to imprimerLes results:This is just impressive in light of the problems had on the Zortrax.Best Buy Ajax Scientific Dual:
For me it worked on the first try except for the fact that to join the ABS it is better to better to pass a blow of bomb "Dimafix" before. After that I no longer had a single worry. Personally I have not tried to print in high resolution mode, I don't have the utility and so I used the default mode, the result is already very correct. In short, in conclusion, I find that it is a model that is well worth its price, and is quick to operate, easy to integrate.. ;. No electrical protection of the control circuit (transistor, diode...) and difficult to get reliable information. The mounting with a Raspberry works nickel, but does not correspond to a durability of home automation. I can't well tell you what it is, but my son-in-law, recipient (and requesting!) was delighted, telling me that he was going to be able to design a micro-computer with these parts and I don't know what else... I've tried it, it works at first sight. Rest find an app to use it in all of its possibilities. The DATASHEET is quite complex and it is necessary to download the library:[...On Sale Ajax Scientific Dual:
]my son ordered happens to make a camera so no worries I would recommend is product without hesitation. The quality and average over cassantde the more he is badly wound, and this block has the utilisationil need to stay near the printer under penalty of losing its print. I bought a reel of the blue color, but it does not stick to the bed plate, after 2 or 3 layers it rises up. I have other strands that do not do this for the same prints. Printrbot Simple Metal. A lot of components to start and have fun. The card Sainsmart is fully compatible with Arduino. The USB cable was the right one. The components are of quality very average, including the pack battery that I had to resolder them before I use them. The servo motor is operated 20 seconds before the gear system does not assign... The LCD screen is of poor quality, it is very difficult to read it. 5 stars except that the components were not readily identified. To documentation (in English) see descriptive article (below) from Amazon or: [..... ]Tutorials excellent - 24 chapitresForum Sainsmart is not very useful. Bcp. Spam; search engine very poor and virtually no response on questions. This kit is for a beginner, but a beginner in the world of Arduino. This is not to somebody. with no knowledge of the world of electronics/computing. good presentation in a plastic box of protectionmais what it lacks for novices and a manual to start to begin to do this by handHello, prints well on a FlashForge creator Pro, Temperature of nozzle de195°C, a feedrate of 50mm/S and a Travel Feedrate 45 mm/S. Temperature plateau of 50°C.Ajax Scientific Dual Reviews:
Very good printer precision correct secure for children because it is close. simple to use. I the council.. The 27/11/2014. Not bad but runs a lot if printed too hot. 170°C (or 25°C lower than for most other PLA), and 35°C max for the heating bed, otherwise the pieces will start falling apart. Once the temperature set, the rendering is not bad, without being great. Hello, The product is more translucent than transparent. It was not a clear finish like glass, but it lets in a little light, unlike the filament-white. Anyway we don't see through. As an illustration, the abs is more difficult to print than PLA. For my part, I put systematically a raft (RAFT) and a little bit of glue stick on the tray equipped with paper tape (blue). It is heated to 110 or 120 °C the temperature of the filament is increased to 225°C. But I am a beginner in this dommaine. It is recommended to ventilate the room, following the emissions of particulate matter and odeurs. De in general if you have problems to print an STL file repair with NETFABB basic (free) can fix things. Cordially. it was missing several components provided in the kit (potentiometer, decoder) over the arduino board is filled with false contact.Best Buy Ajax Scientific Thermometer Temperature Outdoor:
does not recommend for a novice user! Impossible to get off without risk of damaging, disappointed because for pouvoirrécupérer the piece to print, it took off the surface. this product is expensive considering the price of a printer, 75 euros for this piece about, and there are printers from 80 euros, and "all in one", with scan and copy without a PC for 100 euros. (on this site) In addition to the failure of my printer had not come to this room, so I returned the product and changed in fact printer, fortunately that Amazon refund without a problem and without discussing. Ordered on Saturday, received 5 days later, on Thursday. I order often and this blue PLA and I find that it is perfect, there is no filament when printing. I prints has a temperature of 220 °C and without temperature of the "Bed". with a Prusa I3 equipped with a nozzle of 0. 3. I am perfectly satisfied. Once good settings are found, flawless, no problem with the diameter found, the color is consistent. By cons do not forget that it is the ABS so you need a printer intended for. And at an affordable price. It is necessary to provide cables and resistors additional. On the tutorials it is located on the site sainsmart.
COMMENTS